ACCESSORIES

Flexa have the appropriate accessories such as sealing rings, locknuts, adapters, reducers, extensions around our cable protection systems and much more in our program.

FR

Flat-sealing for metric | PG | CTG | NPT threads, restistant against oil, protection against water and dust

Material: Perbunan
Temperature: -20°C ... +120°C

FRH

Flat-sealing for metric | PG | CTG | NPT threads, especially for protective rate IP 68 and high mechanical stresses

Material: centellen
Temperature: -50°C ... +200°C

OR

O-ring for metric | PG threads, restistant against oil, protection against water and dust

Material: Perbunan
Temperature: -20°C ... +120°C

ORE-M

O-ring for metric thread, sealing against water and dust, resistant against chemicals, weatherproof, REACH and RoHS compliant

Material: EPDM
Temperature: -40°C ... +120°C

GM

Counternut especially for metal metric | PG | CTG | NPT threads

For Protective conduit: Counternut

Material: Nickel-plated brass
Temperature: -40°C ... +200°C

GMK

Counternut especially for metric threads | PG | NPT plastic threads

Material: Polyamide, Fibre-glass reinforced
Temperature: -40°C ... +100°C

GMK-Duo-M

Counternut separable, especially for connector RQG-Duo-M with metric thread

Material: PA 6 plastics
Temperature: -40°C ... +110°C^+150°C

GME

Counternut EMC with metric | PG thread, cutting edges for best contact

Material: Nickel-plated brass
Temperature: -40°C ... +200°C

VBM-M

Fitting sleeve, connection metric to metric inner thread

Material: Nickel-plated brass
Temperature: -40°C ... +200°C

WIC

Connecting elbow, metric | PG inner and metric | PG outer thread

Material: Nickel-plated brass
Temperature: -40°C ... +100°C

REM

Reducer, reduction of a metric | PG thread to a smaller size

Material: Nickel-plated brass
Temperature: -40°C ... +200°C

REK

Reducer, reduction of a metric | PG thread to a smaller size

Material: Polyamide, Fibre-glass reinforced
Temperature: -30°C ... +100°C

EWM

Enlargement, extension of a metric | PG thread into a larger size

Material: Nickel-plated brass
Temperature: -40°C ... +200°C

EWK

Enlargement, extension of a metric | PG thread into a larger size

Material: Polyamide, Fibre-glass reinforced
Temperature: -30°C ... +100°C

ADMF

Fire protection closure, inner | outer thread, fire barrier for fed-through cables, minimum of 30 minutes fire blocking (E30)

Material: Body: nickel-plated brass | galvanized steel on request, O-ring: Perbunan, Inlay: carbon based
Temperature: -40°C ... +600°C^+850°C

ADM

Adaptor to combine different types of threads metric | PG

Material: Nickel-plated brass
Temperature: -40°C ... +200°C

ADK

Adaptor to combine different types of threads metric | PG

Material: Polyamide, Fibre-glass reinforced
Temperature: -30°C ... +100°C

STM

Blind plug for metric | PG threads

Material: Nickel-plated brass
Temperature: -40°C ... +200°C

STK

Blind plug for metric | PG threads

Material: Polyamide, Fibre-glass reinforced
Temperature: -30°C ... +100°C

Z-M

Adaptor with strain relief, metric outer and inner thread, application In combination with all connectors

Material: Nickel-plated brass
Temperature: -40°C ... +100°C
IP class [acc. to EN 60529]: IP 68

KSM

Cable gland with metric | PG thread

Material: Nickel-plated brass
Temperature: -20°C ... +100°C^ +130°C
IP class [acc. to EN 60529]: IP 68

KSK

Cable gland with metric | PG thread

Material: Polyamide
Temperature: -20°C ... +100°C^+130°C
IP class [acc. to EN 60529]: IP 68

DE

Multible sealing insert for metric | PG threads. with bore holes for installation of several single cables

Material: Plastics TPE
Temperature: -30°C ... +100°C

DEO

Sealing insert for metric | PG threads, suitable to bore individual clearance holes

Material: TPE
Temperature: -30°C ... +100°C

BW

Fastening angle, angle sheet for metric | PG threads with a through-hole and two fastening bores

Material: Steel, Elocpassivate
Temperature: -40°C ... +200°C

BWK

Screw connector fastening angle, metric | PG thread, connection holder with two fastening bores

Material: PP plastics
Temperature: -40°C ... +100°C

SKM

Tubing-Clamps

Material: Galvanized steel | Rubber-profile
Temperature: -40°C ... +120°C

ROHRflex Cutter

For cutting the ROHRflex corrugated plastic tubings

Material: -

Conduit Separating Shears

Conduit separating shears

Material: -

ROHRflex-Slitter

For slitting ROHRflex-tubings

Material: -

New

Bell Fitting Driver

For screwing the sleeves into the conduits

Material: -

Circlip Pliers

For easy mounting the brass thrust collars on the conduits

Material: -

Mounting Tool FLEXAzip

Mounting tool for slitted ROHRflex tubings FLEXAzip

Material: -